Power Tube Crimping Machine

Power Tube Crimping Machine

The classification of the power tube crimping machine can be divided into hydraulic high-pressure pipe press, brake pipe press, air conditioning pipe press, power pipe press, etc., according to the function of use. If the mechanical structure can be divided into straight drum type press, double column type press, open type press, C type press, and if the control mode can be divided into electromechanical type press, PLC type press, CNC type press.

1. The operation principle of the double hydraulic circuit is adopted, that is, the advance and retreat of the piston and the opening and shrinking movement of the mold are all generated by the hydraulic power source. It not only moves smoothly and returns quickly, but also does not occur like spring back position, so that the mold does not open and lock. And the cylinder locking system design is before and after through, easy to clamp a variety of special-shaped elbows. 2. The hydraulic system consists of a motor, oil pump, solenoid valve, pressure regulating valve and hydraulic valve, which has a double hydraulic oil circuit with advance and retreat motion. Moreover, the double hydraulic oil circuit also increases from a fast oil drain valve oil circuit, so as to achieve the purpose of more rapid return, and the speed can be adjusted, the noise and the system pressure can be reduced.
In the electrical control system, the control circuit is applicable to PLC circuit, it is easy to repair the circuit, convenient maintenance, simple replacement.
4. The clamping mold and die base adopt the processing technology without cumulative error, so as to ensure that the clamping line spacing of the product after clamping is uniform, without the phenomenon of size head.
5. In order to ensure the permanent mechanical accuracy and life of the clamping machine, not only high-quality alloy steel materials are selected on the locking mechanism components, but also unique heat treatment process is adopted. So the longer service life of the clamping machine: and material selection, heat treatment, mechanical processing technology and the rationality of the structure is inseparable!
6. For the double column buckle machine C buckle machine because it is not easy to set dead positioning, must use numerical control method to control the size of the buckle, such as Fenbao, UNIFLEX manufacturers.
7. Withholding standard
Theoretical requirements: do not take off the head, do not destroy the rubber hose
Want to want to do not take off the head - the pressure should be large, want to do not want to destroy the inner glue - the pressure should be small. In order to resolve this contradiction.