Manual Box Plate And Frame Filter Press is a kind of intermittent pressure filter equipment, used for all kinds of suspension of solid liquid separation, separation effect is good, easy to use, widely used in petroleum, chemical, dye, metallurgy, pharmaceutical, food, paper making and sewage treatment and other need to carry out solid liquid separation field, suitable for small filter industry, general use pressure is low, Filtration field with filtration pressure less than 0.4Mpa. Manual filter press equipment is divided into: plate frame and van and other products.
Read MoreSend InquiryThe Hydraulic Automatic Box Plate And Frame Filter Press consists of alternating filter plates and filter frames to form a group of filter chambers. The surface of the filter plate has grooves, and its protruding parts are used to support the filter cloth. The filter frame and filter plate have through holes in the corners and form a complete channel for access to suspension, wash water and filtrate when assembled. There are handles on both sides of the plate and frame to support the beam, and the plate and frame are pressed by the pressing device. The filter cloth between the plate and the frame acts as a sealing gasket. The suspended hydraulic pressure is fed into the filter chamber by the feed pump and the filter residue is formed on the filter cloth until the filter chamber is filled. The filtrate passes through the filter cloth and flows along the filter plate groove to the corner channel of the plate frame and is discharged centrally. After filtration, the filter residue can be washed with clean washing water. After washing, compressed air is sometimes introduced to remove the remaining washing liquid. Then open the filter press to remove the filter residue, clean the filter cloth, re-press the plate and frame, and start the next working cycle.
Read MoreSend InquiryThe structure of the Hydraulic Diaphragm Box Plate And Frame Filter Press is different. The filter chamber of the plate and frame filter press is made of two kinds of filter plates staggered, a solid filter plate and a frame filter plate. The diaphragm filter press uses two different filter plates, one solid filter plate and the other hollow filter plate. The frame filter plate is like four enclosures, and the hollow filter plate is cast by two layers, forming a large gap in the middle of the filter plate, that is, the hollow filter plate.
Read MoreSend InquiryThe Chamber Filter Press is composed of a filter plate arranged on the main beam in a certain order, a filter cloth sandwiched between the filter plates, and a diaphragm filter plate, and the filter plate, filter cloth and diaphragm filter plate are arranged between each other, forming several independent filter units - at the beginning of filter chamber filtration, the slurry enters each filter chamber through the feed port on the thrust plate under the push of the feed pump, and is filtered by the pressure generated by the feed pump.
Read MoreSend InquiryVertical Filter Press Vertical Filter Press is an automatic filter press that can effectively separate solids and liquids. Its operation mainly consists of the following four stages: filtration, diaphragm extrusion, cake washing, air drying.
Read MoreSend InquiryDiaphragm filter press is a filter press with an elastic membrane installed between the filter plate and the filter cloth. During use, when the feeding is finished, a high-pressure fluid or gaseous medium can be injected into the diaphragm plate, and then the whole diaphragm will bulge and press the filter cake, and then realize the further dehydration of the filter cake, which is commonly known as press filtration.
Read MoreSend Inquiry