Hydraulic Automatic Box Plate And Frame Filter Press

The Hydraulic Automatic Box Plate And Frame Filter Press consists of alternating filter plates and filter frames to form a group of filter chambers. The surface of the filter plate has grooves, and its protruding parts are used to support the filter cloth. The filter frame and filter plate have through holes in the corners and form a complete channel for access to suspension, wash water and filtrate when assembled. There are handles on both sides of the plate and frame to support the beam, and the plate and frame are pressed by the pressing device. The filter cloth between the plate and the frame acts as a sealing gasket. The suspended hydraulic pressure is fed into the filter chamber by the feed pump and the filter residue is formed on the filter cloth until the filter chamber is filled. The filtrate passes through the filter cloth and flows along the filter plate groove to the corner channel of the plate frame and is discharged centrally. After filtration, the filter residue can be washed with clean washing water. After washing, compressed air is sometimes introduced to remove the remaining washing liquid. Then open the filter press to remove the filter residue, clean the filter cloth, re-press the plate and frame, and start the next working cycle.

Hydraulic Automatic Box Plate And Frame Filter Press automatic slurry water separation, industrial sewage treatment chamber filter press working principle to exceed similar imported equipment, to achieve acid and alkali corrosion resistance up to ten years. Working principle of chamber filter press: The bearing seat is unique to fully sealed steel castings, strong and durable, can be guaranteed for six years, chamber filter press working principle: sewage treatment, wastewater treatment, sludge finally form a filter cake discharge.

The individual filter plates of the Hydraulic Automatic Box Plate And Frame Filter Press are thicker than the plate and frame filter plates, that is, the chamber filter press consists of two identical filter plates. When the two filter plates are compressed, a filter chamber is formed for storing granular objects isolated by the filter cloth. The feed hole is placed in the center of the filter plate. It is generally used in industries with more granular materials such as sewage treatment, mineral processing, and coal washing. The chamber filter press should not cause bias pressure in each filter chamber, so the filter plate should not be damaged, the filtration speed is fast, the slag discharge is convenient, the filtration pressure is large, the liquid content of the filter cake is low, it can withstand the maximum filtration pressure of up to 3.0Mpa, it is easy to realize automatic plate discharge, and the adaptation range is wider.